Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools and Parts
TOOLS NEEDED:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Cordless drill
¹⁄₁₆" and ³⁄₈" Brad point
doweling drill bit
Phillips screwdriver
Rotary tool
PARTS NEEDED:
Custom Overlay Door Panel—See "Overlay Panel—Rear View."
Hardware (Optional)
PARTS SUPPLIED:
Flat-head screws (8)
Round-head screws (8)
Custom Overlay Panel
If you plan to install a custom overlay panel, you will need to
create the panel yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
The thickness of the wood overlay must be ³⁄₄" (19 mm).
Overlay panel must not weigh more than 20 lbs (9.07 kg).
Overlay panel weighing more than recommended may
cause damage to your refrigerator.
Overlay Panel—Rear View
1. Create a custom overlay panel using the dimensions shown.
2. Rout four depressions into the overlay panel, where indicated,
to attach the overlay hooks.
4
INSTALLATION INSTRUCTIONS
Scissors
Masking tape
Tape measure
Petroleum jelly
Overlay plates (2)
Overlay hooks (4)
NOTE: To inlay the overlay hooks into the panel, it is
recommended that you use a rotary tool to rout the surface
where the overlay hooks will be placed.
⁷⁄₈
4
"
(124 mm)
²⁹⁄₃₂
"
(23.3 mm)
²⁵⁄₃₂
"
(20 mm)
¹³⁄₃₂
4
(11.2 cm)
A
¹⁄₁₆
"
(2 mm)
3"
(76 mm)
A. Overlay hook locations
Install Overlay Hooks
Using a Phillips screwdriver and eight flat-head screws attach the
overlay hooks to the back of the overlay panel. See "Overlay
Panel–Rear View," for overlay hook locations.
A. Overlay hooks (4)
"
¹³⁄₃₂
"
(10 mm)
⁵⁄₈
23
"
(60.0 cm)
²⁷⁄₃₂
29
"
(75.8 cm)
A
Publicité
Table des Matières
