Door Closing - KitchenAid KBCA06XPBL01 Guide D'utilisation Et D'entretien

8. Remove the door closers from the old bottom hinge and
install them on the new bottom hinge
IMPORTANT: Be sure to properly align the door closer–
bottom bosses with the holes in the bottom hinge.
A
B
A. Door closer (top)
B. Door closer (bottom)
C. Bosses
9. Remove the three screws from the old bottom hinge and
remove the hinge.
10. Turn the old bottom hinge upside down and reinstall on the
top, opposite side of the refrigerator. Remove the hinge pin.
11. Turn the door upside down so the bottom of the door is
facing up. Remove the two screws from the pivot plate and
remove the plate.
12. Flip the plate over and reinstall it on the opposite side of the
door.
13. Turn the door over so that the top of the door faces up.
14. Tilt the door forward and place the hole of the pivot plate on
the new bottom hinge pin.
6
IMPORTANT: Be sure to properly align the door closer–top
bosses with the holes in the hinge plate.
C
15. Align the door with the top hinge and install the hinge pin.
16. Install the six plastic screw plugs in the old hinge holes on the
top and the bottom of the cabinet.

Door Closing

Your refrigerator has four leveling legs. If your refrigerator seems
unsteady or you want the door to close more easily, adjust the
refrigerator's tilt using the instructions below:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug into a grounded 3 prong outlet.
Use two or more people to move and install
refrigerator.
Failure to do so can result in back or other injury.
2. Move the refrigerator into its final location.
A. Pivot plate
B. Boss
Door Closing
WARNING
Electrical Shock Hazard
WARNING
Excessive Weight Hazard
A
B