Beko CEG7425B Mode D'emploi page 73

7 Troubleshooting
Problem
Water runs into
the waste con-
tainer instead
of through the
coffee spout du-
ring rinsing when
switching the
coffee machine
on and off.
Coffee machine
cannot be switc-
hed on.
Coffee
dispensing is
very uneven or
only one-sided.
If you cannot resolve
the problem with
C
the steps described
above, please contact
customer service.
Beko call center:
444 0 888
Fully Automatic Coffee Maker / User Manual
Cause
• Brewing unit is
blocked or maladjusted.
• Not plugged in.
• Spout is clogged or
blocked by foreign
bodies (e.g., coffee
bean or similar).
Remedy
•Remove and clean
the brewing unit. If the
brewing unit is closed,
open before cleaning.
Unscrew the brewing
unit at the black tooth
pin. An opened brewing
unit is illustrated in
section 6.8 Cleaning the
brewing unit.
•Insert the mains plug.
• Pull the coffee spout
upwards and clean the
inside or remove the
foreign body (e.g., coffee
bean).
73 / EN