Beko CEG7425B Mode D'emploi page 37

5 Operation and use
If the height adjuster
C
is difficult to move,
clean it. Proceed as
described in section
6.5.
4. Open the rotary switch for milk
froth/hot water (13).
5. Put as much milk froth into the
glass as required by taste and
preparation mode.
6. You can stop the milk froth
output at any time by closing
the rotary switch for milk froth/
hot water (13).
7. In order to add the required
quantity of coffee, select the
corresponding cup symbol by
pressing button 4.
C
If "Coffee powder"
is selected, only one
cup can be used.
Fully Automatic Coffee Maker / User Manual
The standard filling
amounts
individual
amounts you set in
Chapter 5.11 Changing
and saving the cup
filling level in bean
C
mode or 5.13 Changing
and saving the cup
filling level in powder
mode also apply in
this mode. If you want
to change the cup fill
quantity, you can find
the information in the
chapters mentioned
above.
8. Press " " (button 6) to obtain
coffee.
You can cancel coffee
C
output at any time by
pressing "
(button 6).
or the
filling
" again
37 / EN