Beko CEG7425B Mode D'emploi page 55

6 Cleaning and maintenance
1. Press button 2 until the function
display "Cleaning program" is
selected.
2. Then press "
– The display "Cleaning program"
flashes in the display, while
the "Fill water tank" display is
permanently lit.
3. Remove the water tank (7) and
fill with min. 1 litre fresh water.
Insert the water tank again.
4. Open the lid of the coffee bean
container (14) and the coffee
powder shaft (10).
5. Put a cleaning tablet into the
coffee powder shaft.
Fully Automatic Coffee Maker / User Manual
" (button 6).
6. Then press "
– The appliance will implement
several cleaning cycles. After
the cleaning phase is complete,
the " " display will light up
permanently.
7. Remove and empty the drip tray.
8. Press the drip tray back onto
the appliance until it audibly
engages.
The drip tray serves
as collecting con-
C
tainer for the clean-
ing water. You can
alternatively place a
container (>350 ml)
under the outlet.
" (button 6).
55 / EN