Beko CEG7425B Mode D'emploi page 22

5 Operation and use
• When the operating temperature
has been reached, the coffee
machine automatically performs
a rinsing cycle. Water may flow
here into the drip tray.
• When the rinsing cycle is
completed, the coffee machine
is ready for operation. The
following displays light up during
initial start-up:
5.3 Switching off the
coffee machine
1. Press the ON/OFF button to
switch off the coffee machine. It
will then perform a rinsing cycle.
22 / EN
C
C
Fully Automatic Coffee Maker / User Manual
If you have also
prepared a coffee
speciality with milk/
milk froth, the coffee
machine will prompt
you to also clean the
milk system after
rinsing. Details for
this can be found in
section (see section
6.3) system cleaning
should be carried
out otherwise
time-consuming
cleaning of the milk
frother will become
necessary (see
section 6.11).
If the water tank
is empty or the
required milk system
cleaning was not
performed, the
switch-off process
will automatically
be delayed for 15
minutes.