Beko CEG7425B Mode D'emploi page 46

6 Cleaning and maintenance
You can only
C
dispense coffee
again when cleaning
has been performed.
You can cancel the
C
cleaning program at
any time by pressing
"
A milk system clean-
C
ing solution can be
bought in specialist
shops.
The symbols "Milk system cleaning"
and "Milk froth" flash in the display.
1. Fill a receptacle with 200 ml of
water and the appropriate quan-
tity of cleaning solution for the
milk system (refer to notes on
the cleaning solution).
46 / EN
" (button 6).
2. Insert the milk tube down to
the bottom of the container
with the cleaning solution.
Open the rotary switch for milk
froth/hot water.
C
3. After the run is complete,
empty the container with the
cleaning solution, rinse and
fill with 200 ml fresh water to
rinse the system.
4. Insert the milk tube down to
the bottom of the container.
5. Push "
Fully Automatic Coffee Maker / User Manual
The cleaning solu-
tion is fed into the
appliance via the milk
tube and discharged
via the outlet unit
into the drip tray.
" (button 6).