Beko CEG7425B Mode D'emploi page 39

5 Operation and use
5. After rinsing is complete, empty
the container with the cleaning
solution, rinse and fill with 200
ml fresh water to rinse the
system.
6. Insert the milk tube down to
the bottom of the container.
7. Press " " (button 6).
8. After rinsing is complete, close
the milk froth/hot water rotary
switch.
– The appliance switches back to
operating mode after several
seconds.
Fully Automatic Coffee Maker / User Manual
If several drinks are
prepared with milk,
the milk system should
be
C
cleaned.
the
prompt
when the appliance is
switched on again. It
is then not possible to
select a drink.
– Milk residue must also be
cleaned from the outlets on the
dispenser unit each time a milk
coffee speciality is dispensed.
subsequently
Otherwise
program will
cleaning
39 / EN