Beko CEG7425B Mode D'emploi page 49

6 Cleaning and maintenance
3. Release the distribution hose
on the door by pulling it lightly
from the inside of the door
B
A
towards the outside 2 and
pressing to the left 3 so that
it clicks out of the fastener.
The dispensing unit can now
be removed and the interior is
easily accessible.
1
3
2
4. Thoroughly clean the coffee
dispensing unit from the inside
and outside with warm water
and a suitable brush to remove
any coffee residue and prevent
mould from forming.
C
5. Reinsert the coffee dispensing
unit, see section 6.7.
Fully Automatic Coffee Maker / User Manual
A
C
1
3
4
2
Disconnect and clean
the hose distribution
system of the coffee
dispensing unit (only
if necessary, e.g,
clogging), see sec-
tion 6.6.
6.6 Cleaning the
hose distribution
system
1. Grip the loose hose end near
3
to the spring and pull the cross
shaped hose connector 1 out of
its fixing. Subsequently pull both
2
hose ends with the sleeve ends
out of the dispensing tubes 2.
2
2. Pull the sleeves out of the
hoses A and disconnect the
hoses from the connecting
piece C. Pull the hose together
with the spring C from the
connecting piece.
3. Leave the parts immersed in
a milk cleaning solution for
several hours. Refer to the
instructions on the cleaning
solution for the exact quantity.
1
1
49 / EN