Beko CEG7425B Mode D'emploi page 64

6 Cleaning and maintenance
9. Subsequently use the brush of
the measuring spoon to clean all
1
parts of the milk frother nozzle.
Make sure that all vents of the
milk frother and its nozzle are
cleaned with the brush.
10. For
1
soiling mix 200 ml of warm water
with the corresponding quantity
of milk cleaning solution. Refer
to the instructions on the
1
cleaning solution for the exact
quantity.
11. Leave all parts of the milk
frother in the cleaning solution
for 5 hours or over night.
12. Replace the frother nozzle
in the milk frother and lock
the nozzle by turning it 45°
with the rounded end of the
measuring spoon.
1
64 / EN
removing tough
13. Replace the lid 1 (pay attention
1
to the direction).
14. Replace the milk frother in the
coffee machine and push the
lever downwards to lock.
1
15. Insert the end of the milk hose
1
into the opening on the upper
left of the milk frother until it
stops and press the milk hose
into the guide.
16. Close the door of the coffee
dispensing unit. When closing
the door,
should be located at the upper
position, otherwise the milk
tube will be jammed.
Fully Automatic Coffee Maker / User Manual
the dispenser