Technical Specifications; Assembly And Adjustments - Haussmann MJ10250IX Guide De L'utilisateur

Code
Model
Capacity with 10" Blade:
Depth of cut at 90°
Maximum tilt angle of arbor (left)
Depth of cut at 45°
Max. cut right of blade with rip fence
Max. cut left of blade with rip fence
Saw Dimensions:
Cabinet depth
Cabinet width
Cabinet length
Main table
Extension table (left and right)
Rear extension table
Saw blade:
Blade capacity maximum
Blade arbor
Dado blade capacity maximum
Saw Constructions:
Cabinet
Table
Rip fence
Drive system
Mitre gauge
Blade guard
Motor
No load speed
Laser:
Class
Wavelength
Max. output
Net weight
3
1
fig.1

TECHNICAL SPECIFICATIONS

ASSEMBLY AND ADJUSTMENTS

BATTERY INSTALLING AND HOW TO CHANGE BATTERY (Fig. 1)
• Uninstall the blade guard component by loosening the handle (1). Remove
the locking screw (2) on the battery box cover with a screwdriver, and open
the battery compartment.
• Install two "AAA" batteries.
• Install the battery box cover by closing the screw (2), tighten it securely.
• Turn the switch (3) to the ON position in order to activate the laser cutting
guide.
2
• If the batteries run out, performing the procedure 1-3 to change the batteries.
WARNING: DO NOT OPERATE WHEN THE SAW IS ON.
THE LASER LINE
This tool is equipped with a battery-powered laser cutting guide. The laser line
allows the operator to anticipate the path of the saw blade on the workpiece before
97925005
MJ10250IX
3-1/8" (8 cm)
45°
2-5/32" (5.5 cm)
22" (56 cm)
22-29/64" (57 cm)
11-13/32" (29 cm)
20-3/4" (52.7 cm)
25-15/32" (64.7 cm)
26-1/64 x 19-11/16" (66.1 x 50 cm)
5-29/32 x 19-11/16" (15 x 50 cm)
26-1/64 x 2-35/64" (66.1 x 6.5 cm)
10" (25.4 cm)
5/8" (1.59 cm)
1/2" (1.3 cm)
Plastic
Cast aluminum
Aluminum extrusion
By gear
Plastic with T-slot roller guide
Acrylic with anti-kickback pawls
120 V, 15 A, 60 Hz
4500RPM
II
650 nm
1 mW
68.2 lbs (31 kg)
39