Technical Specifications; Assembly And Adjustments - Haussmann MJ2630II Guide De L'utilisateur

!
Code
Model
Saw blade:
Blade capacity maximum
Blade arbor
Saw Constructions:
Table
Motor
No load speed
Laser:
Class
Wavelength
Laser outpower
Max.cutting capacity:
Crosscut at 0º mitre, 0º bevel
Mitre at 45º mitre, 0º bevel
Bevel at 0º mitre, 45º bevel
Compound at 45º mitre, 45º bevel
Net weight
Bolt
Bolt hole
fig.1
UNPACKING
WARNING: If any part is missing or damaged, do not plug in the mitre saw until
you have replaced the missing or damaged parts.
To avoid injury, the styrofoam block should be removed between the motor and
the table.
If any parts are missing or damaged, please contact Customer service at
1-866-206-0888.

TECHNICAL SPECIFICATIONS

97925001
MJ2630II
12" (30.5 cm)
5/8" (1.59 cm)
Cast aluminum
120 V, 15 A, 60 Hz
3800 RPM
II
650 nm
1 mW
4-1/4 x 12" (10.5 x 30.5 cm)
4-1/4 x 8-29/64" (10.5 x 21.5 cm)
1-31/32 x 12" (5 x 30.5 cm)
1-31/32 x 8-29/64" (5 x 21.5 cm)
49 lbs (22.3 kg)

ASSEMBLY AND ADJUSTMENTS

This mitre saw shall be used only to saw workpieces with a maximum thickness
of 4-1/4" (10.5 cm).
It shall not be used to saw inflammable, explosive or toxic materials and to cut
steel, iron, brass or food. Other uses for the machine will lead to the damage of
the machine and a series of dangers to the operator.
This saw is for private and household use, not for professional or industrial ones.
Only identical accessories as the ones provided with the mitre saw are authorized.
Never use the mitre saw in the rain or other wet conditions.
BENCH MOUNTING (fig. 1)
• When the tool is shipped, the handle is locked in the lowered position by the stop
pin (8). Pull the stop pin (8) and rotate it 90°, either clockwise or counterclockwise.
• The tool can be bolted with four bolts (not provided) to a level and stable surface
using the bolt holes provided in the tool's base. This will help prevent tipping and
possible injury.
35