Description, Specifications And Instructions; Technical Data; General Notes - Haussmann 92109B Manuel De L'utilisateur

DESCRIPTION, SPECIFICATIONS AND INSTRUCTIONS

Read the entire text of the
operating instructions prior to the
assembly and operation of the
device.
These operating instructions are intended
to make it easier for you to get familiar
with your device and utilize its intended
possibilities of use.
The operating instructions contain important
notes on how to work safely, properly and
economically with your machine and how
to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and
working life of the machine.
In addition to the safety regulations
contained herein, you must in any case
comply with the applicable regulations of
your country with respect to the operation
of the machine.
Put the operating instructions in a clear
plastic folder to protect them from dirt and
humidity, and store them near the machine.
The instructions must be read and carefully
observed by each operator prior to starting
the work. Only persons who have been
trained in the use of the machine and have
been informed on the related dangers and
risks are allowed to use the machine. The
required minimum age must be met.
In addition to the safety notes contained in
the present operating instructions and the
special regulations of your country, the
generally recognized technical rules for the
operation of wood working machines must
be observed.
Attention!
Read the instructions for use before
starting-up the machine.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.

Technical data

Saw blade ø mm
Speed /min
Swivel range
Tool cutting edge inclination
Adjustments
Weight kg
Cut data for rip cutting
90°/90°/ 4 23/32 x 2 3/8 IN (12X6 CM)
90°/45° 4 23/32 x 1 3/16 IN (8X6 CM)
45°/90° 3 1.2/8 x 2 3/8 IN (12X3 CM)
45°/45° 3 1.2/8 x 1 3/16 IN (8X3 CM)
Drive
Motor V/Hz
Input A
Subject to technical modifications!
The height of the work piece must be at
least 3 mm.
Make sure that the work piece is always
secured with the clamping device.

General notes

• After unpacking, check all parts for any
transport damage.
Inform the supplier immediately of any
faults.
• Later complaints cannot be considered.
• Make sure the delivery is complete.
• Before putting into operation, familiarize
yourself with the machine by carefully
reading these instructions.
• Use only original accessories, wearing or
replacement parts.
5
ø 8 1/4"x ø 5/8", 24 T
5000
2 x 45°
45°
45°, 30°, 22,5°, 15°, 0°,
15°, 22,5°, 30°, 45°
7,7
120 V ~ 60 Hz
10 A
EN