Cobra SPYBALL 6808-9 Notice De Pose page 12

This guide provides the information required to fit the security system
and set it up in conformity with the customer's requirements and / or
with possible local legislative requirements. For more detailed
information, please consult the user instructions.
Table of contents
1. Kit composition
2. Siting of the control unit and LED
2.1. Siting of the control unit
2.2. Siting of the LED
3. Wiring instructions
4. Adjustment of movement detection sensitivity
5. Selectable functions - Enabling and disabling procedures
6. Final testing
7. Troubleshooting guide
8. Technical data
1. KIT COMPOSITION
The kit includes
•
A control unit
•
One or two remote control transmitters with Biker Recognition function
•
A set of fitting accessories
•
Installation and operation manuals.
2. SITING OF THE CONTROL UNIT AND LED
2.1. Siting of the control unit
Choose a suitable location, well hidden and protected by the motorcycle
body, far from sources of excessive heat and water infiltrations.
The alarm unit can be placed horizontally, vertically or upside down, the
movement sensor operates independently of the position the alarm is set in,
therefore the angle of placement does not affect it. The leads exiting the
alarm should point downwards or be bent in such a way that water cannot
seep into the alarm body via the loom.
The alarm system, its components and wiring must not interfere with the
normal operation of the motorcycle.
SPYBALL 6808-9/6828-9 ENGLISH 12