Using the Telephone
Switching the handset on/off
Switching on: On the switched-off handset, press
Switching off: When the switched-off handset is in an idle state, press
long time.
p
Enabling/disabling the keypad lock
The keypad lock prevents the telephone from operating unintentionally. If the
handset is secured with a PIN, you need that PIN to unlock it. When delivered,
the PIN is set to "0000".
Switching on: Press
Switching off: Press
is not 0000).
Note: If a call is signalled on the handset, the keypad lock is automatically
disabled. You can accept the call. After the call has ended, the lock is
applied again.
Caution: When the keypad lock is active, only emergency numbers,
which have been specially defined as such, can be dialled.
Dialled calls
Dialling the phone number
1.
Enter the number on the
for a short time.
2.
Press
Or:
1.
Press
for a long time.
2.
Enter the number on the
To cancel dialling, press
Dialling from Telephone Book
1.
Open one of the telephone books:
• The handset's local telephone book: Press
• The assigned address book on the PBX: Press
34
for a long time.
for a long time. Enter the handset PIN on the
.
.
.
COMfortel M-710 - Instructions V01 06/2021
for a long time.
for a long time.
.
for a
(if it