Auerswald COMfortel M-710 Notice D'utilisation page 29

2. For you, as a consumer, this means: We guarantee that our devices are error-free when supplied. If a manufacturing
error is identified within 24 months of the delivery date we will repair or replace the device free of charge without you, as
the consumer, having to provide the usual legally required proof that this fault was present when you received the device.
We either use new parts or parts in mint condition for the repair or replacement delivery. Any parts removed from the
device become our property and can be destroyed by us.
3. In addition to this warranty, you have the unlimited legal right to claim against the supplier on the basis of the terms of
the warranty for defects on the basis of the purchase contract. However, in contrast to our Manufacturer's Warranty, the
legal warranty for defects only applies to the device's state when sold (handover).
4. You can only claim against this warranty if you return the faulty device to Auerswald GmbH & Co. KG or our local
general importer or distributor, outside Germany, at your own cost, with a valid proof of purchase (invoice or till receipt).
When you return it to us, please provide a detailed description of the fault that has occurred, and also tell us your
telephone number, in case we need to contact you. To prevent shipping damage, provide suitable transport packaging
(e.g. original packaging with a secondary shipping box).
5. The Manufacturer's Warranty excludes damage caused by mishandling, operating errors, misuse, external influences,
lightning strikes/power surges, modifications to the product and extensions. Also excluded are wearing parts (e.g.
batteries, fuses, rechargeable batteries and memory cards) and damage caused by wearing parts (e.g. if batteries go
flat). Shipping damage, consequential damage, and costs arising from down times and travel times are also excluded.
6. The warranty is cancelled if repairs are carried out by unauthorised agents.
Initial Commissioning
Removing the protective film
The handset display is protected by a protective film. Remove the protective film!
Putting the charging cradle in place
The charging cradle is designed for use in enclosed, dry spaces with a
temperature range of +5 °C to +45 °C.
Place the charging cradle on a flat non-slip pad.
Normally, the device feet do not leave marks on the surface on which it is placed.
However, due to the very large number of different varnishes and polishes used
on furniture, it is possible that the device feet might leave marks on the surface
they touch.
Connecting the charging cradle
1. Connect the flat connector (A) on the end
of the wall-mounted power supply cable
(B) to the charging cradle (C).
2. Plug the wall-mounted power supply (B)
into the mains socket.
Disconnect the flat connector from the
charging cradle (C) again:
1. Disconnect the wall-mounted power
supply (B) from the mains.
COMfortel M-710 - Instructions V01 06/2021
Initial Commissioning
A
B
C
D
29