Programming Of The Sw164Osm Matrix On Screen Menu - Videotec KEYPLUS Manuel D'instructions

The same procedure can be used in order to modify all four start/end times of the day sequence.
Each pressing of the key changes the shown value of 10 minutes; by pressing the key more than 1 second the value
changes quickly of 30 minutes.
Note: a wrong start/end of the day sequence can give rise to anomalies in the sequence cycles displayed on the
screen.
List of abbreviations:
Wrkday start.: Start time of day sequance on workdays
Wrkday end.: End time of day sequence on workdays
Hlfday start: Start time of day sequence on halfdays
Hlfday end.: End time of day sequence on halfdays
If night sequence is not required set start time to 00:00, and end time to 23:59
To modify Start/end time of day sequence
Description
Select the time to be modified by pressing
Get into the menu by pressing
U D
Press to modify the time
By pressing the key more than 1 second the value
changes quickly.
Exit from the menu by pressing
saving operation
Get back to main menu with
Exit from matrix programming mode by pressing
choosing the voice Setup end and confirm with

Programming of the SW164OSM matrix On Screen Menu

To program the Matrix SW164OSM read the respective operating instructions carefully.
U D
and
E
C
, and confirm the
C
C
, or
E
Keys
U D
E
U D
C
C
C
D E
[ ]
Page 20
Display
DATE/TIME 3.
Workday start. £
WRKDAY START. 3.3
¢ 06:00 Clr
WRKDAY START. 3.3
¢ 07:00 Clr
DATE/TIME 3.
Iniz.diur.lav. £
MATRIX SETUP
3.Date/Time ¢
MATRIX SETUP
Setup end. ¡
KEYPLUS9702