To Modify Time / Date Parameters - Videotec KEYPLUS Manuel D'instructions

To modify Time / Date parameters

Time and Date parameters are useful to define the start and the end of the day sequence (and conversely of the night
one) in the SW164OSM matrix.
Attention: wrong time/data parameters can cause apparent misbehaviours in matrix switching cycles!
A day of the week (from Monday to Sunday) can be defined as workday, halfday or holiday: this is made, on matrix
SW164OSM, using a Personal Computer Setup Program.
On holiday the night sequences are performed around the clock, and the "day" one is ignored.
It's possible to define different start and end times for both workday and halfday.
The use of such day "types" has to be intended, for example, configuring the day sequence as the set of inputs to see
when people is working in a building, and the night one when they are off duty.
Time and Date parameters:
- Actual date
- Actual time
- Start time of day sequences on workdays
- End time of day sequences on workdays
- Start time of day sequences on halfdays
- End time of day sequences on halfdays.
The loading from the matrix and the saving of the changes introduced in date/time parameters are carried out when
the operator gets into or exits from the menu.
Time and date parameters
Description
Select Date/Time menu by pressing
E
Select menu using
loaded from matrix.
E
Type to change the actual date.
Date format: Year / Month / Day.
Type the new date
C
Press to exit and get again in the Date/Time menu
Select Change time with
modify the time according to the procedure described.
C
Press to exit and get again in the Date/Time menu
U
and
; wait till previous values are
D E
and press
Keys
D U D
E
E
96E
01E
02E
C U D E
[ ]
, then
C
Page 19
Display
MATRIX SETUP
3.Date/Time ¢
DATE/TIME 3.
Change date £
ACTUAL DATE 3.1
95/11/01
ACTUAL DATE 3.1
Thu 96/01/02
ACTUAL TIME 3.2
12:00
DATE/TIME 3.
Change time £
KEYPLUS9702