Pre-Start Checks; Start And Stop Procedure - Altrad Belle RPC 60/80 Manuel De L'opérateur

Pre start-up inspection
1. Thoroughly inspect the compactor for signs of damage. Check components are present and secure. Pay special attention to the
belt guard.
2. Check the engine oil and hydraulic oil level and top up as necessary.
3. Check the engine fuel level and top up as necessary.
Before you operate or carry out any maintenance on this machine YOU MUST READ and STUDY
WARNING
this manual.
Honda GX390 Petrol Engine
1. Open the fuel tap by moving the fuel ON / OFF lever fully to the right.
3. Turn the engine ON / OFF switch clockwise to the 'I' position.
4. Set the throttle to the idle position by moving the throttle lever fully to the right. Do
engine starts.
starter return.
Hatz Diesel Engine (Crank Handle)
reduce speed when starting.
4. Turn decompression lever until stop is reached. In this position automatic decompression is heard to engage and the engine can
then be started.
6. Take hold of the starting handle with both hands and turn it at increasing speed. The maximum speed of rotation must have been
handle out of the guide sleeve.
engine.

Pre-Start Checks

Start And Stop Procedure

ON by moving the choke lever fully
OFF position by moving it to the right.
ON / OFF switch anticlockwise to the '0' position.
13
GB
-
GB
Throttle Lever
Choke Lever
Fuel ON/OFF
Lever.