Environment; Trouble Shooting Guide - Altrad Belle RPC 60/80 Manuel De L'opérateur

Safe Disposal.
Instructions for the protection of the environment. The
machine contains valuable materials. Take the
discarded apparatus and accessories to the relevant
recycling facilities.
Problem
Engine will not start.
Engine still will not start.
Unit will not move.
Forward speed too slow.
Reverse speed too slow.
Loss of Hydraulic Oil.
Machine operates
erratically.

Environment

Trouble Shooting Guide

Cause
No fuel.
Spark plug fouled.
Engine cold.
Major Fault.
Engine speed too slow.
Drive belt tension loose.
Worn or Damaged Clutch.
Drive failure.
Gearbox failure.
Too much oil in hydraulic head.
Wrong adjustment of control system
Not enough oil in hydraulic head.
Air in control system.
Wrong adjustment of control system
Connectors leaking.
Defective hydraulic hose.
Piston seal in gearbox defective.
Shock mounts damaged.
Component
Handle
Front cover
Main frame
Baseplate
Hand Grips
Engine
Flexible Mounts
Various Parts
Remedy
Open fuel tap.
Fill fuel tank.
Switch engine on.
Clean and reset plug gap.
Close choke.
then repeat start procedure.
Contact Agent or Altrad Belle.
Set engine speed control to fast.
Adjust belt tension
Repair or Replace as necessary.
Contact Agent or Altrad Belle.
Contact Agent or Altrad Belle.
Reduce oil level.
Contact Agent or Altrad Belle.
Fill and bleed system.
Bleed control system.
Contact Agent or Altrad Belle.
Reseal connectors.
Replace hose.
Contact Agent or Altrad Belle.
Replace all four mounts.
23
Material
Steel
HDPE
Steel
Steel
Polyurethane Foam
Aluminium
Steel and Rubber
Steel and Aluminium