Activate/Deactivate Limit Alarm Pause Function - VOLTCRAFT 1435090 DL-200T Mode D'emploi

• Once the recording starts/stops, the latest measurement is shown in
the display.
• Press button DOWN to return to function menu.
e) Activate/deactivate limit alarm pause function
• In order to activate/deactivate the limit alarm pause function during
recording, the limit alarm must be enabled during configuration (please
refer to ""MEASUREMENT" options - "ALARM SETTING"" on page
75).
•
Activate/deactivate limit pause function by holding and pressing
button ENTER (8) for few seconds.
Once the alarm pause function is activated/deactivated, the latest
measurement is shown in the display.
Recorded values during activated pause function are shown in the
report's graph as usual. However, it is clearly indicated in the graph
when and for how long the pause function was activated.
88
long
press
ENTER
pause
on
long
press
ENTER
pause
off