VOLTCRAFT 1435090 DL-200T Mode D'emploi page 73

"RECORD
START
CONDITION"
"RECORD
START
CONDITION"
Select one of the following options to determine when
data logger starts recording. Each option has a default
stop setting.
"IMMEDIATELY UNTIL MEMORY FULL": Data logger
starts recording data immediately until the memory
is full.
"START UPON KEYPRESS": Data logger starts
recording after holding button ENTER (8) pressed for
few seconds. Data logger stops recording until memory
is full.
"START UPON START TIME": Data logger starts
recording at a defined date and time until the memory
is full.
"START/STOP TIME": Data logger starts and stops
recording data at a defined date and time.
"CIRCULAR LOGGING": Data logger starts recording
immediately and circularly. The newest data overwrites
the oldest data. It stops recording/logging once the
battery is depleted or "CIRCULAR LOGGING" has been
replaced by another "RECORD START CONDITION"
during configuration.
73