VOLTCRAFT 1435090 DL-200T Mode D'emploi page 74

"STOP
STYLE"
"START
TIME"
"STOP
TIME"
"START
DELAY
MINUTES"
"SAMPLING
RATE"
"RECOR-
DING TIME"
"LED FLASH
INTERVAL"
74
Select one of the following options to determine when
data logger ends recording.
"NONE": No stop condition is specified. Data logger
stops recording based on the "RECORD START
CONDITION" setting.
"STOP BUTTON": Data logger stops recording after
holding button ENTER (8) pressed for few seconds.
"AFTER PDF CREATED": Data logger stops recording
after PDF report is generated.
Define date and time when to start recording data.
Define date and time when to stop recording data.
Define delay time of immediate start of recording.
Define how frequent the data logger measures and
records data in "MINUTES" or "HOURS".
When using the data logger at extremely low
temperatures, choose a longer sampling rate to
decrease power consumption and to prolong the
battery life.
This value is automatically calculated based on the
sampling rate and cannot be set by the user.
Select how fast the LED control lights (2,3) shall flash.
Choose an interval of 5, 10, 15, 20, 25 or 30 seconds.