Define Date And Time During Configuration; Button Enter; Before First Use; Protection Foil - VOLTCRAFT 1435090 DL-200T Mode D'emploi

e) Define date and time during configuration
• Select month, year and time with date picker and time sliders. The time
will be shown as "TIME" in HH:MM:SS format. Confirm with "DONE".
Date and time settings are displayed in the corresponding fields.
• Alternatively, click "NOW", if you require an immediate start of logging.
Actual date and time - as per locally set on your computer - will be filled
automatically into field "START TIME"/"STOP TIME".
f) Button ENTER
• Press button ENTER to switch between maximum and minimum
reading.
• Press and hold button ENTER for few seconds to start/stop logging or
activate/deactivate pause function.

10. BEFORE FIRST USE

a) Protection foil
• Remove the protection foil from the LC display (5).
b) Insert/replace battery
• Install the battery before first-time use or replace the battery when the
battery symbol "
Removing and replacing batteries does not delete data or settings.
• Remove the protective cap from the data logger.
• Press and hold the button RELEASE BATTERY COMPARTMENT (7)
and pull out the logger unit from the housing. The housing fits tightly due
to the second rubber seal (9).
• Release the button RELEASE BATTERY COMPARTMENT.
68
" appears in the LC display.