Measurement" Options - "Alarm Setting - VOLTCRAFT 1435090 DL-200T Mode D'emploi

"ENABLE
DISPLAY"

"MEASUREMENT" options - "ALARM SETTING"

Configure alarm settings in the "Measurement" tab:
"ENABLE
LED
ALARM"
"LIMIT
PAUSE
FUNCTION"
Remove the checkmark from the check box to turn off
the LC display, or check the checkbox to turn on the
LC display.
When using the data logger at extremely low
temperatures, choose a longer sampling rate to
decrease power consumption and to prolong the
battery life.
The LED alarm indicates when a measured value is
outside the defined range.
To disable the LED alarm, remove the checkmark in
the checkbox.
To enable the LED alarm, check the checkbox .
When using the data logger at extremely low
temperatures, disable the LED alarm to
decrease power consumption and to prolong the
battery life.
During recording, the limit alarm can be suspended.
Select "ENABLE" or "DISABLE" to enable/disable the
pause function.
Pause function will not stop the recording.
75