Télécharger Imprimer la page

Videotec WASPT Serie Manuel D'instructions page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
4 Product description and
type designation
The Videotec WASPT is a wash kit consisting of a
water tank with an integrated pump for PTZ cameras
and camera housings equipped with wiper.
This wide range of wash kits comes in capacities
from 5 to 23 litres and delivery heads of up to 30
metres.
The optional DTWRX card enables remote control
(via RS-485) of the wiper and the washer pump if
used with a stand-alone housing.
The versions with 11m and 30m delivery head have a
level switch for automatic stoppage of the pump.
The 30m (98ft) delivery head versions are only
available in 230Vac or 120Vac.
Using the anti-freeze liquid, the minimum operating
temperature (versions with 5m (16ft) and 11m (36ft)
delivery heads) can reach as low as -25°C (-13°F).
4.1 Product marking label
See the label attached to the product.
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
warranty.
5.1 Unpacking
When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
6
5.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Glass wash system
• Cable ties
• Silicone sheath
• Hydraulic joints
• Supports for the supply tube
• Locking bracket of the delivery pipe
• Delivery pipe
• Washer semi-rigid pipe (with nozzle)
• Bolts and screws
• Instruction manual
5.3 Opening of the 30m delivery
head pump casing
The side casing must be dismantled for any removal
or replacement operation of the tank. Unscrew the 4
screws and remove the casing.
Fig. 1
5.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
MNVCWASPT_2222_EN

Publicité

loading