Maintenance - Cebora ITACA GP73190-BIO Manuel D'instructions

5

MAINTENANCE

Before carrying out any inspection inside the cooling unit, turn the unit off using power source switch also di-
sconnecting the power cable from the electrical mains.
Daily maintenance
It is good practice to carry out the following maintenance operations every day: Check the coolant level, adding fluid
as necessary.
Check there are no leaks in the cooling water pipes.
Six-monthly maintenance
It is good practice to carry out the following maintenance operations every six months: Blow out any dust and dirt
using compressed air. Clean the cooling radiator particularly thoroughly.
Check the tightness of fittings, cables and connectors.
Replace the coolant using CEBORA "ITACA GP73190-BIO" only.
3301128/A 15