Solo 582 Manuel D'utilisation page 24

Workshop service, replacement parts and guarantee
Maintenance and repair: Maintenance and repair of modern motorized devices, as well as their safety-relevant assemblies, require
qualified, specialized training and a workshop equipped with special tools and test devices.
Thus SOLO recommends that you have a specialized SOLO workshop carry out all work that is not described in these operating
instructions. Your SOLO specialist has the required training, experience, and equipment at his disposal to provide you with the
most cost-effective solution and can help you in many ways with advice and service.
Replacement parts: Dependable operation and the safety of your device also depend on the quality of the replacement parts that
you use. Use only original SOLO replacement parts.
Only original parts come from the production of the device and thus guarantee the highest possible material quality, dimensional
accuracy, function, and safety. Original replacement parts and accessory parts are available from your dealer. He also maintains the
requisite replacement part lists to determine the required replacement part numbers, and he is constantly provided with informa-
tion concerning detail improvements and innovations in the replacement part offering.
Please note as well that guarantee performances from SOLO are not possible if parts other than SOLO original parts are used.
Guarantee: SOLO guarantees problem-free quality and will assume the costs for defect remediation by replacing the defective
parts in the case of material or manufacturing defects that occur within the guarantee period after the date of purchase.
Please note that specific guarantee conditions apply in some countries. Ask your sales person if you have any questions. As vendor
of the products he is responsible for the guarantee.
We request your understanding that no guarantee can be assumed for damages due to the following:
• Non-compliance with the operating instructions. • Neglecting required maintenance and repair work. • Damages due to im-
proper carburetor adjustment. • Normal wear and tear. • Obvious overload through persistently exceeding the upper performance
limits. • Using non-approved tools and cutting fixtures. • Using non-approved cutting bar and chain lengths in the case of chain
saws. • The use of force, improper handling, misuse, or accident. • Damages caused by overheating due to dirt build up on the
ventilator casing. • Intervention by non-specialized persons, or improper repair attempts. • The use of unsuitable replacement
parts or parts other than SOLO original parts to the extent that they cause damage. • Using unsuitable fuel or fuel that has been
stored too long. • Damages that can be traced to implementation conditions from the rental business.
Cleaning, care, and adjustment work are not recognized as guarantee performances. All guarantee work must be carried out by a
SOLO dealer.
GB
In the best interest of continued technological progress we reserve the right to change design and configuration of any product
without prior or other notice. Therefore, please note that text and illustrations of this manual are not to be considered binding and
do not constitute a basis for legal or other claims.
SOLO Kleinmotoren GmbH
Postfach 60 01 52
D-71050 Sindelfingen
Germany
www.solo-germany.com eMail: info@solo-germany.com
24
Telefon 07031 - 301-0
Fax 07031 - 301-130
Fax Export 07031 - 301-149