marklin 60983 Mode D'emploi page 34

CV Explanation
145 PoM Switching range
Storing different states:
Bit 0: Storing function states
173 PoM Bit 1: Storing speed
Bit 2: After a reset starting up with/without ABV
Bit 3 - 7: always 0
Storing different states:
174 PoM Bit 0: Storing direction of travel
Bit 1 - 7: always 0
176 PoM Vmin Analog DC
177 PoM Vmax Analog DC
178 PoM Vmin Analog AC
PoM ("Programming on Main") must be supported by the locomotive controller / central controller.
1 An extensive table for function mapping can be found on the Internet at: http://www.maerklin.de/de/service/technische-informationen
34
Values Default Notes
128 = 50% of speed level, 64 = 25% of speed
0 - 128 128
level
0 / 1
0 = do not store, value = store
0 / 2 7
Individual values must be added.
0 / 4
0 = do not store
0 / 1 1
1 = store
0 - 255 50 Must be smaller than CV 177
0 - 255 170 Must be larger than CV 176
0 - 255 60