Hydraulic Diagram - meibes LogoPack A Mode D'emploi

3. Hydraulic diagram

1.
Stainless steel plate heat exchanger
2.
PF controller with 3- way function
3. Hot water throttle 12 l/min
4. Automatic air vent
5. Zone valve (optional: living space controller)
6. Strainer with service stoppers 1/2"
7. Adaptor for the heat flow meter (L= 110 mm, 2 x 3/4" male thread)
8.
1/2" coupler for heat flow meter immersion sleeve
9.
Cold water meter (installed by the customer or on request)
10. Shut-off ball valve
A Cold water from line (connection, fittings and cold water meter supplied by the customer or
on request), device connection: 3/4" male thread – flat sealing
B
Cold water to the apartment (connection by the customer)
C
Hot water to the apartment, device connection: 3/4" male thread – flat sealing
D Heating flow line from the line, device connection: corner ball valve 3/4" male thread
E Heating flow line to the dwelling heating circuit, device connection: corner ball valve 1/2" male thread
F Heating return line from the dwelling heating circuit, device connection: 1/2" male thread
G Heating return line to the line, device connection: corner ball valve 3/4" male thread
3
2
1
8
9
4
5 6
M
4
7
10
19