Battery Replacement; Maintenance; Issues And Possible Solutions - Jacuzzi profile Utilisation & Entretien

Battery replacement

Remote control battery replacement
- Invert the remote control unit and identify
the battery cover.
- Rotate the cover anti-clockwise, to the "O-
PEN" position. The cover will easily come
off when unblocked.
- Remove the battery cover, lifting it
upwards.
- Replace the battery with CR2032 or e-
quivalent.
CR2032
3V
- Replace the battery cover, rotating it to
the "CLOSE" position.

Maintenance

Clean the remote control with a cloth and neutral detergent.
Do not use solvents or similar products.
Do not leave the remote control close to heat sources or in
direct sunlight, or in water where the spa is not in use (prolon-
ged contact with hot, chemically treated water may change its
appearance).

Issues and possible solutions

• The audio system does not work.
Replace the battery.
Ensure the remote control is pointing towards the receiver and/or
is not greater than 4 metres away from the aforementioned.
27