Publicité
Les langues disponibles
Les langues disponibles
TABLE FOR CHOICE OF NOZZLE INSERTS
Explanation of nozzle insert designation For example #517
•
The first digit corresponds to half of the spray pattern width in inches (5 x 2 = 10 inches (25.4 cm).
–
Use nozzle inserts with more compact spray pattern for small objects and with a wider spray
pattern for large objects.
•
The last two digits specify the size of the opening in thousands of an inch (17 corresponds to
0.017 of an inch ).
–
Use a larger opening size, the higher the viscosity of the material.
Material*
Oil-based varnish
Wood preservative
Concrete paint
Enamel paint
Varnish
Aluminium paint without flake metal
Vinyl latex paint
Acrylic latex paint
Oil-based paint
Oil- and water-based primer
* Examples of material that cannot be used: textured coatings, elastomers, asphalt coatings, wood
preservatives, filler.
Recommended nozzle size
0.011–0.013"
0.011–0.013"
0.011–0.013"
0.011–0.013"
0.011–0.017"
0.011–0.017"
0.013–0.017"
0.013–0.017"
0.013–0.017"
0.013–0.017"
Spray pressure
At least 55 bar
At least 55 bar
At least 55 bar
At least 103 bar
At least 103 bar
At least 103 bar 1700
At least 117 bar
At least 117 bar
At least 117 bar
At least 117 bar
EN
53
Publicité
