Meec tools 011485 Mode D'emploi page 46

EN
Safety class II
Approved in accordance with the
relevant EU directives.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage
Nominal input power
Safety class
Hose length
Flow
Weight
Sound pressure
level, LpA
Sound power
level, LwA
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN 14462.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
46
230 V ~ 50 Hz
1300 W
7.5 m
1.17 l/min
7.5 Kg
93.5 dB(A) K=3 dB(A))
107.5 dB(A) K=3 dB(A))
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
PACKAGE CONTENTS
1 spray, 1 high-pressure hose, 1 high-pressure
spray gun, 2 spanners and 2 hex keys.
PRODUCT PARTS
1. Power switch (on/off)
2. Pressure switch
3. Fluid outlet
4. Button for manual valve
I
5. Fluid inlet
6. Pressure relief valve
7. Pump
8. Pressure control knob
9. Power cord and plug
10. Suction hose
11. Outlet hose
12. High-pressure hose
13. Spray gun
FIG. 1
EXPLANATION OF PRODUCT
CONTROLS AND FUNCTIONS
Power switch
When the switch is in position 1 the product is
on, and in position 0 it is off.
FIG. 2
Pressure control knob
Pressure control knob (setting the pressure and
material flow).
FIG. 3