Cleaning And Maintenance - CASO DESIGN FinoCompact Mode D'emploi

EN
Tare-Function
1. Place the object to be weighed in the weighing
bowl.
2. The LED display will show the weight.
3. Hold the "Unit/Tare" button for a few seconds.
4. The word TARE will fl ash twice on the display and
it will show the weight 0.
5. Place any further objects to be weighed on the
scales to add their weight to the total.
6. When you remove the object/s to be weighed,
the scales will show the negative weight.
7. Repeat Step 3 and the display will show 0.
PLEASE NOTE
 If the display alternates between two numbers,
press the "Unit/Tare" button.
Weighing units (Unit function)
Units: Millilitres (ml) Gramms (g) Ounces (oz)
Measuring 0.1-500
ranges:
Tolerance:
Briefl y press the "Unit/Tare" button to change the
weighing unit.
Switching o
The scales switch off automatically after 2 minutes.
You can also turn them off manually by pressing the
"On/Off " button.
Error codes
Overload indicator:
The display will show the error code "EEEEE" if the
scales are overloaded.
Remove some of the object to be weighed.
12 CASO FinoCompact
You can also place other
suitable containers on the
scale surface to weigh them.
0.1-500 0.01-17.7
+/-0.4%
The scales are not on a stable surface:
The display will show the error code "unSt".
Place the scales on a hard surface.
The scales cannot identify the weight:
The display will show the error code "out2".
A weight exceeding 100 g / 100 ml or 3.5274 oz is on
the scales when they are turned on.
Remove the weight from the scales, turn the scales
on again and then place the object to be weighed
on the scales.

12 Cleaning and Maintenance

This chapter provides important information on
properly cleaning and maintaining your scale.
Safety information
ATTENTION
 Clean the unit after every use.
 Never immerse the scale into water or other
liquid. Do not put it in the dishwasher.
 If moisture penetrates the unit's housing, it can
damage the electronic components. Please
ensure that no moisture enters the device.
 Do not use any hard or abrasive cleaning agents
 Do not attempt to scrape off stubborn grime
with hard or abrasive tools
Cleaning the housing, the display and the
weighing bowl
Clean the housing, the display and the weighing
bowl with a soft, damp cloth.
Please observe the follo-
wing safety notices, before
cleaning the scale: