Safety; Getting Started - CASO DESIGN FinoCompact Mode D'emploi

EN

9 Safety

This chapter provides you with important safety
notices when handling the device.
The device corresponds with the required safety
regulations. Improper use can result in personal or
property damages.
Intended use
This device is only intended for non-commercial use,
for weighing food.
WARNING
application! The User bears the sole risk.
General Safety information
PLEASE NOTE
to prevent possible injury:
 Examine the device for any damages prior
to using it. Do not use the unit if it appears
damaged.
 Children shall not play with the appliance.
 Cleaning and user maintenance shall not be
made by children without supervision.
 Only customer service departments
authorized by the manufacturer may carry
out repairs on the device during the
guarantee period, as otherwise the guara
tee entitlements will be null and void in the
event of any subsequent damages.
 Defective components must always be re-
placed with original replacement parts.
Only such parts will guarantee that the
safety requirements are fulfi lled.
10 CASO FinoCompact
Danger due to unintended
use and/or other types of
Please observe the follo-
wing general safety rules

10 Getting Started

This chapter will guide you through safely unpacking
and setting up your new unit.
Packaging Safety information
Packaging materials are not
WARNING
toys and should be disposed
of properly!
 Do not allow children to play with packaging
materials due to risk of suff ocation
What's included
The kitchen scale L20 includes the following
components:
• CASO FinoCompact
• Stainless steel weighing bowl (Cover)
• Fixing tape
• Instruction Manual
Examine the shipment to
PLEASE NOTE
ensure the unit and manual
are included and inspect the unit for any visible
damage.
 Immediately notify the carrier and/or supplier
about any incomplete shipment or damages as a
result of inadequate packaging or mishandling.
 You will need to 2 batteries to use the scales
(1.5V/ AAA – not included).
Unpacking
Carefully remove the packaging material and unit
from the carton.