Error Messages; Overload-Indication; Cleaning And Maintenance; Disposal Of The Old Device - CASO DESIGN BODY ENERGY Mode D'emploi

5.5 Weighing
Put the scale on a hard & flat surface. Step on the scale steadily when you see 0.0
kg in the display, wait till your weight displays on the screen. The scale switches off
automatically after about 80 seconds.

5.6 Error messages

Overload-indication

When the scale is over loaded (over 200kg), "Err" will appear on the
screen.
Low loading of capacitor
When the screen indicates this, it will turn off automatically after 10
seconds.

6 Cleaning and Maintenance

This chapter provides important information on properly cleaning and maintaining
your scale
6.1 Cleaning

Do not use chemical products.

Use a damp cloth to clean the surface of the scale.
► Please use a damp cloth to clean the scales. Do not allow water to get inside the
unit.
► Do not use chemicals to clean the scales.

6.2 Disposal of the Old Device

To protect the environment, it's important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances
► Please take your old unit to the nearest recycling center for safe
disposal
► Until it can disposed of properly, store your old unit away from children
caso Personenwaage BODY ENERGY
Please note
Please note
7