Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NexXxoS XP³ Light
4.
Mount the cooler on your socket:
• First screw the threaded bolts with the short end into the base.
• Now put the cooler with the bracket onto the screws from above.
Place the 4 washers and compression springs as shown. Use the knurled nuts to fix
the cooler to the socket. Hand tighten the knurled nuts crosswise.
Please note: Some mainboards of the socket 2011/- 3 do not
have continuous mounting holes in the socket area. In this case,
do not tighten the screws more than 4 mm.
Alphacool International GmbH
28
Do not use tools.
Tighten only by hand!
4x knurled nuts
4x springs
4x washers
1x Intel bracket
4x bolts Intel 2011
Publicité
Table des Matières
