Alphacool NexXxoS XP3 Light Mode D'emploi page 27

NexXxoS XP³ Light
4.
Mount the cooler on your socket:
• Fasten the backplate using the 4 screws, 8 washers and 4 nuts.
• Put the cooler with the bracket onto the screws from above.
• Place another 4 washers and compression springs. Use the knurled nuts to fix the
cooler to the socket. Tighten the knurled nuts crosswise and hand-tight.
Alphacool International GmbH
4x knurled nuts
4x springs
4x washers
1x Intel bracket
4x nuts
4x washers
1x backplate with distance pad
4x washers
4x screws Intel 115X
26
Do not use tools.
Tighten only by hand!