Wiring - Morningstar EcoPulse EC-10 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour EcoPulse EC-10:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

For proper air flow, allow at least 15 cm (6 in) of space
above and below the controller, and 50 mm (2 in) at
the sides - see Figure 3-1 below. Install in an area
protected from direct rain and direct sun.
If the controller is installed in an enclosure, some
ventilation is recommended. Do not locate in an
enclosure where battery gases can accumulate.
2 in /
50 mm
Figure 3-1. Proper Clearances for Passive Cooling
12
Installation
6 in / 150 mm
6 in / 150 mm

3.4 Wiring

5
4
2
1
To battery (+)
To properly
and (-)
sized array
terminals
Figure 3-2. Wiring the EcoPulse
REFER TO FIGURE 3.2 WHEN USING THE FOLLOWING
WIRING INSTRUCTIONS
EcoPulse Operator's Manual
To load (+)
and (-)
terminals
3
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ecopulse ec-10mEcopulse ec-20Ecopulse ec-20mEcopulse ec-30Ecopulse ec-30m

Table des Matières