Soehnle Professional 8210 Mode D'emploi page 11

Power-on and weighing
Zeroing
Switching over the weight units
Totalising
Power-off
Only when the scale is not loaded.
After the test routine, the display is set to zero.
The scale is ready for use.
Place the weighing product on the scale.
The display shows the weight.
If zero is not indicated when the scale is unloaded, press the
key.
To change the weight units (g - lb/oz), press
After placing the first weighing product on the scale, press
The totals symbol then appears in the display in addition to the
weight. Empty the bucket.
Place the next weighing product on the scale.
Press .
Clear the totals reading by pressing
To switch off the appliance immediately, press
be empty and display 0).
Otherwise the scale will switch off automatically after 4 minutes.
English
.
(the scale must
.
11