Introduction - Lindy 32828 Manuel

English Manual

Introduction

Front View
1. Port LEDs:
On Line: Lights RED to indicate that a PC attached to the corresponding port is up and
running. If the LED is flashing, it indicates that the Port is being used for Cascading
to another LINDY CPU Switch.
Selected: Lights GREEN to indicate the currently selected port. The LED is steady under
normal conditions, but flashes when its port is accessed under Auto Scan mode.
2. Port Selection Switches
Press a switch to access the PC attached to the corresponding port.
Pressing buttons 1 & 2 simultaneously for 3 seconds performs a keyboard and mouse reset
Pressing Buttons 7 and 8 simultaneously starts Auto Scan Mode.
3. Sound Opening
System sounds (beeps, etc.), are emitted from this opening.
4. LINDY CPU Switch LITE OSD Reset
To reset the LINDY CPU Switch, use a thin object (such as the end of a paper clip, or a
ballpoint pen) to press this recessed switch in to initiate a warm reset. If the switch is kept in
for longer than three seconds, a cold reset takes place.
5. Power LED
Lights to indicate that LINDY CPU Switch LITE OSD-8 is receiving power.
3