Stacking And Mounting - Lindy 32828 Manuel

English Manual
15

Stacking and Mounting

For Stacking:
The unit comes with stacking brackets included. Note that there is a top and bottom half to each
bracket. The top half has a convex surface; the bottom half has a concave surface.
Line up the four bottom brackets of the top unit with the four top brackets of the bottom unit;
then fit the top unit down onto the bottom unit.
For Rack Mounting:
Screw the mounting brackets into the sides of the unit, as shown in the diagram below
Slide the unit into the rack and secure it to the rack.