English Manual
Hardware Requirements
Console
A VGA or Multisync monitor of resolution up to 1900x1440
A PS/2 Style Mouse
A PS/2 Style Keyboard
PC
The following equipment must be installed on each PC that is to be connected to the system:
VGA, SVGA or Multisync card.
6-pin mini-DIN (PS/2 style) or DB-9 (standard serial) mouse port.
Either PS/2 Style keyboard port (6-pin mini-DIN, 5V on pin 4, Ground on pin 3) or AT Style
keyboard (5-pin DIN, 5V on pin 5, ground on pin 4).*
* See the note under Cables in the next section.
Cables
Although it is possible to use standard VGA (monitor) and PS/2 (Keyboard and mouse) cables
to connect the PCs to the LINDY CPU Switch LITE OSD-8, for optimum signal integrity and to
simplify the layout, we strongly recommend that you use the following high quality LINDY KVM
cables:
PC to LINDY CPU Switch LITE OSD-8
Length
Art.No.
1m
33741
2m
33742
3m
33743
5m
33744
10m
33746
Console Extension Cable to LINDY CPU Switch LITE OSD-8
Length
Art.No.
1m
33721
2m
33722
3m
33723
5m
33724
10m
33726
Note: 1.
If your PC uses a standard AT style keyboard socket you will need to purchase a
PS/2-to-AT keyboard adapter (LINDY Art.No. 70029) or short adaptor cable (LINDY Art.No.
70129) or any standard keyboard adapter, in order to plug the cable into the computer's
keyboard port.
2.
If your PC uses a standard 9 pin serial port for the mouse, you will need to
purchase a PS/2-to-Serial mouse adapter (LINDY Art.No. 70058) and plug it into the serial port
of the computer.
Do NOT use a serial to PS/2 adaptor at the CPU Swtich !
Description
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Description
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
Keyboard/Video/Mouse Cable (2x PS/2 + 1x VGA)
2