Lindy 32817 Manuel D'utilisateur

KVM Switch Micro – PS/2 & VGA
User Manual
Benutzerhandbuch
Manuel d'utilisateur
Manuale d'uso
LINDY No. 32817
For Home and Office Use
Tested to Comply with
www.LINDY.com
FCC Standards
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH
English
Deutsch
Français
Italiano
- FIRST EDITION (SEPTEMBER 2009)
User Manual
Introduction
Thank you for purchasing the LINDY KVM Switch Micro. Please read this
short manual carefully to fully understand the functions and features of this
KVM Switch. The KVM Switch allows two computers to be connected and
controlled from a single keyboard, monitor and mouse. Computer selection
may be made either by the remote push button switch or keyboard hotkey.
Package contents
Two KVM Switch Micro dongles connected by cable
Remote push button switch
This manual
Installation
English
• Switch off your computers
• Connect the two KVM Switch
dongles to the graphics card
VGA output port and connect
the two PS/2 cable ends to the
PS/2 ports of your PC.
• Connect your keyboard,
monitor and mouse to the PS/2
and VGA ports on the KVM
switch dongles.
• Connect the Remote Switch to
the PC1 KVM Switch dongle.
• Switch on the first computer
and allow it to boot up
completely, do not switch away
from this port unless the port
LED on the Remote Switch is
illuminated green and the
computer has completed the
boot up procedure.
• Switch on the second PC in
the same way.
- 2 -