Grillo DUMPER 406 Mode D'emploi Et Maintenance page 7

INTENDED USE OF THE MACHINE
Use only original accessories and spares which assure maintenance of the machine's safety.
IDENTIFICATION AND AFTER-SALES SERVICE
SERVICING
This handbook provides the instructions for using the crawler truck. For a correct basic maintenance
contact your Local Dealer.
SPARE PARTS
Original spares should always be used as these are the only ones which offer safety and interchange-
ability.
Each order should include the machine serial number and the code of the spare part needed.
WARRANTY
The warranty is subject to the terms and conditions stated on the card.
As regards the engine, the individual manufacturers' conditions apply.
RECOMMENDED SPARE PARTS TO BE KEPT ON HAND
1 belt
1 clutch cable
HOW TO ORDER SPARE PARTS
Always state the machine's serial number and the code of the spare part needed. Contact our authorised
service centres. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47023 CESENA (FC) ITALY
Tel. 0039 - 0547 - 633.111 / Fax 0039 - 0547 - 632.011
Web site: www.grillospa.it / e-mail: grillo@grillospa.it
TECHNICAL DATA
ENGINE: HONDA GC160 4 stroke, 3.7 kW petrol engine, with pull-staring system
CLUTCH: per belt tension
GEARBOX: gear type in oil bath, 6 speeds: 3 forward speeds + 3 reverse speeds
DRIVE: rubber tracks with inner steel links
TRACK BEARING SURFACE: 700 mm
STEERING: with clutches in oil bath combined with brakes (patented)
CHARGING BODY: mm 1000 x 655 x 200 (height without 125-mm-top extension sides)
IDENTIFICATION
The crawler truck is provided with an ID plate
showing the machine's serial number, located on
the chassis under the body.
Openable sides
Forward tipping system operated by gas springs
8