GYS STARTPACK PRO 12.24 XL Manuel D'utilisation page 70

Waste management:
• This product should be disposed of at an appropriate recycling
facility. Do not throw away in a domestic bin.
• The product's manufacturer contributes to the recycling of its
packaging by contributing to a global recycling system.
• This product should be recycled appropriately
GENERAL DESCRIPTION
This charger has been designed to charge the STARTPACK 12.24 XL (2*50 Ah batteries), or for the floating charge of the START-
PACK 12.24 XL.
START UP
1. Connect the charger to the STARTPACK 12.24 XL.
2. Connect the charger to the mains (single phase 220-240V 50-60Hz).
3. Select the charging mode depending on the ambient temperature, by pressing the button
- Hot mode : Ambient temprature is > 0°.
- Cold mode : Ambient temperature ambient is < 0°
4. After roughly 5 seconds, the charge starts automatically.
5. During the charge, the device
the indicator stays on, the battery is completely charged.
6. The charge can be interrupted at any time by unplugging the mains plug or pressing the button
7. After the charge, the GYSFLASH 6.12 XL can remain connected to the STARTPACK 12.24 XL.
CHARGE MODES
• Mode description :
10
GYSFLASH 6.12 XL
indicates the charge's progress. Once the indicator
HOT mode (14.4 V) :
14.4V voltage charge for hot weather (above 0°C).
COLD mode (14.6 V) :
14.6V voltage charge for cold weather (below 0°C).
EN
(1):
blinks, the charge is at 80%. Once
.