Swarovski Optik dG Mode D'emploi page 13

2.2 FITTING THE EYEPIECE COVER
Feed the loop of the eyepiece cover through the loop holder
on the right side of the dG (1+2). Then pass the cover through
the loop (3) and tighten it (4). Now you can use the cover to
protect the eyepiece (5).
3. PREPARING TO USE THE
DEVICE
Before you start using the instrument, please adjust the follo-
wing settings:
3.1 ADJUSTING THE TWIST-IN EYECUP
Pos. A: For use without glasses:
Turn the eyecups counterclockwise to
the full extent.
Pos. B: For use with glasses:
Turn the eyecups clockwise as far as
they will go.
24
dG / EN dG / DE
3.2 ADJUSTING THE FOCUS
Turning the focusing wheel allows
you to focus on any object from the
shortest focusing distance (see techni-
cal data sheet) to infinity.
3.3 DIOPTER ADJUSTMENT AND FOCUSING
THE CAMERA
Adjust the diopter in order to obtain the best possible photo
quality in terms of focus. Fine tune the sharpness of the reticle
so that it is right for you by turning the diopter adjusting ring.
First turn the diopter adjusting ring counterclockwise all the
way to the left (+) from its initial position (marked on the ring,
bottom center), then turn it clockwise to the right (-) until the
reticle (black lines in the field of view) shows the optimum
focus for you. The black markings on the reticle also delinea-
te the section of the digital image that is guaranteed to be
visible on the smartphone/tablet.
Note:
The adjustment works best if you look through the dG at a
nearby, light-colored wall.
dG / EN dG / DE
25