Ribimex PRTRB12V Manuel D'instructions Et D'utilisation page 16

- Maintain a firm grip on the branch being cut to avoid "skating" or "bouncing" of the
saw.
- Never cut above shoulder height.
- Do not cross arms or overreach.
- Always cut away from yourself.
- Avoid excess flexing or tension on the branch being cut.
• Do not operate the tool that is damaged, improperly adjusted, or not completely and securely
assembled.
IV. GETTING STARTED
4.1- Unpacking
• Remove the product from packaging.
• Check if the product and accessories (if any) are intact.
4.2- Content
• 1 machine body
• 1 battery pack
• 1 battery charger
• 1 chain scabbard
• 1 oil bottle (20 ml)
• 1 instruction manual
4.3- Assembly
Charging the battery
• Use with the provided charger only.
• Perform charging in ambient environment (+4 °C to +40 °C).
• Connect the power adaptor (a) into a suitable wall socket.
• Plug in the charging jack (b) into the charging port on the battery charger.
• Insert the battery (c) into the charger.
• The green indicator (d) light indicates charging in progress, the light goes out when the
Chasse
WARNING!
Before starting assembly or changing accessories, turn it off and remove the
battery.
Pêche
Fig. 2
Loisir et nature
Page 16 / 33
www.ducatillon.com
Jardin Élevage