Installation Examples - Videotec WASNX Manuel D'instructions

Unscrew the knurled nut (01) from the delivery joint
(02). Insert the knurled nut on the delivery pipe (03).
Insert the end of the delivery pipe into the spinner
(04). Lock the nut to the coupling.
02
Fig. 25
Fasten the semi-rigid pipe (01) to the washer support
using the plate (02), the screws (03) and the washers
(04) supplied.
Fig. 26
To calibrate the jet, orientate the nozzle towards the
window of the housing.
Fig. 27
MNVCWASNX_2222_EN
01
04
01
04
02

6.4.1 Installation examples

03
Fig. 28
PTZ unit fastening.
03
Fig. 29 Pole mounting.
Fig. 30 Wall mounting.
11