Würth SWS 12-125-T SOLID Traduction Des Instructions De Service D'origine page 24

Accessories and spare parts
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the device
type plate. The latest spare parts list for the device is
available online at http://www.wuerth.com/parts-
manager. Alternatively, contact your local Würth
agency for a hardcopy.
Disposal
Electrical power tools, accessories and
packaging should be sorted and
submitted to an environmentally-sound
recycling facility. Only for EU countries:
Do not dispose of your electrical power
tool in household waste. According to European
Directive 2012 / 19 / EU on waste electrical and
electronic equipment and its implementation in
national law, broken and unserviceable electric
power tools must be collected separately and
submitted to an environmentally sound recycling
facility.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling
is not covered by warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales rep-
resentative or an authorised Würth customer service
workshop. Subject to technical changes without prior
notice. We accept no liability for printing errors.
24
EC Declaration of Conformity
We herewith declare that this product conforms to
the following standards and directives:
Standards
• EN 60745
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
• 2014/30/EU
• 2011/65/EU
Würth International AG,
Aspermontstrasse 1,
CH-7004 Chur, SWITZERLAND
Gerd Rössler
Managing Director
Chur,: 06/09/2016
Technical documentation with:
A. Würth GmbH & Co. KG,
Reinhold-Würth-Strasse 12-17
74653 Künzelsau, GERMANY
Subject to changes without prior notice.
Patrick Kohler
Head of Power Tools/Ma-
terial Processing